| [1] |
Fan Yang, Yang Minghua, Chen Kaimin, Sun Bingyan.
Effect of PWHT on microstructure and mechanical properties of electron beam welded joints of 31CrMoV9 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 57-60.
|
| [2] |
Sun Dingbang, Wang Yongsheng, Gao Jie, He Zhiyong, Wu Yanxia, Zhou Bing, Ma Yong, Yu Shengwang.
Effect of plasma surface metallizing Nb on diffusion welding performance of γ-TiAl alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 213-218.
|
| [3] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [4] |
Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia.
Failure analysis of 20 steel equal-diameter tee
[J]. Heat Treatment of Metals, 2022, 47(2): 262-266.
|
| [5] |
Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren.
Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 130-134.
|
| [6] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [7] |
Xu Qihao,Yang Lilin, Xia Ming, Qin Chen, Geng Zhenyue, Jiang Yajun, Zhao Liping.
Failure analysis of 38CrMoAlA steel driveshaft
[J]. Heat Treatment of Metals, 2021, 46(9): 268-272.
|
| [8] |
Lin Zhiqing, Zhang Fucheng, Ma Hua, Wang Lin, Chen Chen, Xu Ming.
Effect of FW&TMCP treatment on wear resistance of as-cast high manganese steel frog
[J]. Heat Treatment of Metals, 2021, 46(8): 92-98.
|
| [9] |
Jian Xiaojun, Cui Baowei, Huang Yanjun, Kang Taotao, Wang Ping, Song Yue, Li Weiqiang.
Effect of solution treatment temperature on mechanical and welding properties of GH4169 alloy forging
[J]. Heat Treatment of Metals, 2021, 46(8): 121-124.
|
| [10] |
Ji Guoqiang, Ge Guiming, Yu Lijuan, Zhong Jizhi.
Analysis on cracking of 50CrV4 steel washer
[J]. Heat Treatment of Metals, 2021, 46(7): 254-257.
|
| [11] |
Bao Shun, Liu Rongpei, Feng Han, Nai Qiliang, Jia Jian, Zhu Yuliang, Song Zhigang.
Microstructure and brittleness analysis of FeCrAl stainless steel by hot isostatic pressing
[J]. Heat Treatment of Metals, 2021, 46(5): 9-13.
|
| [12] |
Wang Jingbo, Lian Mingyang, Fu Yadi, Liu Shengxin, Huang Zhiquan, Chen Yong.
Effect of tempering temperature on HAZ microstructure and properties of CMT welded 40CrNiMo quenched and tempered steel
[J]. Heat Treatment of Metals, 2021, 46(5): 99-103.
|
| [13] |
Yin Runbang, Lin Baosen, Mo Qipeng, Li Zhiwei, Zheng Zhou, Tan Hong, Chen Jianbin, Wang Jiongming.
Welding and heat treatment process of 12Cr2Mo1VR/20MnMoNb dissimilar steel joint in auxiliary equipment of power plant
[J]. Heat Treatment of Metals, 2021, 46(10): 155-162.
|
| [14] |
Yang Shiliang, Li Lihang, Dai Hao, Li Zhiyong, Zhao Tong.
Effect of electron beam welding on microstructure and properties of quenched and tempered 15CrMnMoVA high strength steel
[J]. Heat Treatment of Metals, 2021, 46(10): 187-192.
|
| [15] |
Li Jitao, Zhao Wenzhong, Tian Changliang.
Influence of post-weld annealing process on fatigue life of cross joint
[J]. Heat Treatment of Metals, 2020, 45(9): 86-90.
|
