| [1] |
Luo Jiandong, Hu Yanhong, Lin Yuzhou.
Application of low temperature nitriding process with double power supplies on 316 stainless steel
[J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
|
| [2] |
Lu Jinsheng, Zhang Heng, Xu Hongxiang, Guo Shirui.
Ion nitriding technology of inner gear ring of 6.5 MW nuclear power pump
[J]. Heat Treatment of Metals, 2022, 47(3): 97-101.
|
| [3] |
Zhang Hao, Li Changsheng, Gou Zhou, Ji Linlin.
Effect of nitrocarburing temperature on tribological properties of AerMet100 steel after low temperature ion nitrocarburing
[J]. Heat Treatment of Metals, 2021, 46(5): 180-185.
|
| [4] |
Ma Xiaofeng, Ma Ning.
Effect of vacuum pressure on ion nitriding properties of small modulus spline
[J]. Heat Treatment of Metals, 2021, 46(5): 190-192.
|
| [5] |
Liu Yan, Zhang Chengxing, Li Shuangxi.
Process of ion nitro-carbon titanizing for industrial pure iron
[J]. Heat Treatment of Metals, 2021, 46(12): 252-255.
|
| [6] |
Li Shuangxi, Gu Min, Sun Qifeng.
Effect of pre-oxidation on different ion nitriding processes
[J]. HTM, 2019, 44(1): 61-64.
|
| [7] |
He Ruijun, Sun Feng, Wang Lin, Tong Xiaojun.
Surface integrity of ion nitrided titanium alloy
[J]. HTM, 2017, 42(4): 77-81.
|
| [8] |
He Ruijun, Sun Feng, Wang Lin, Tong Xiaojun.
Ion nitriding of maraging stainless steel
[J]. HTM, 2016, 41(5): 129-132.
|
| [9] |
He Ruijun, Sun Feng, Wang Lin, Tong Xiaojun.
Microstructure and wear resistance of ion-nitrided titanium alloys
[J]. HTM, 2016, 41(4): 25-29.
|
| [10] |
.
Hollow cathodic auxiliary ion nitriding of 38CrMoAl steel
[J]. HTM, 2014, 39(9): 56-59.
|
| [11] |
Li Shuangxi, Gu Min, Zhang Binghua, Xu Hongxiang, Wang Hongwei.
Microstructure and uniformity of plasma nitrided layer with rare earth accelerator
[J]. HTM, 2014, 39(5): 114-117.
|
| [12] |
Zhu Xiaohong, Lü Xinfeng, Chen Guoqi, JiangWei.
Failure analysis on explosive welded composite plate
[J]. HTM, 2014, 39(1): 144-148.
|
