| [1] |
Qi Xiaoliang, Li Yan, Ding Wei, Zhao Zengwu.
Effect of original microstructure of medium manganese TRIP steel containing Al on microstructure and mechanical properties after intercritical annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 24-29.
|
| [2] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [3] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [4] |
Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian.
Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature
[J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
|
| [5] |
Liu Tao, Wu Hongyan, Gao Xiuhua, Qin Dongyang, Du Linxiu.
Effect of intercritical tempering temperature on microstructure and mechanical properties of Fe-4Mn-1.2Cr-0.3Cu-0.6Ni medium manganese steel
[J]. Heat Treatment of Metals, 2022, 47(2): 91-98.
|
| [6] |
Dong Rui, Chen Lin, Cen Yaodong, Bao Xirong.
Microstructure and fatigue crack growth of a bainitic steel under different heat treatments
[J]. Heat Treatment of Metals, 2022, 47(2): 153-158.
|
| [7] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [8] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [9] |
Hou Yaqing, Zhang Yu, Yu Mingguang, Wang Jingjing, Yang Li, Su Hang.
Thermodynamic calculation of retained austenite content in Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(1): 25-31.
|
| [10] |
Gao Yaping, Shi Zhongran, Jia Juan, Luo Xiaobing, Song Xinli.
Effect of heat treatment process on microstructure and abrasive wear properties of dredging engineering ship steel
[J]. Heat Treatment of Metals, 2022, 47(1): 32-37.
|
| [11] |
Qiu Xuyangfan, Yang Zhuoyue, Ding Yali.
Solid solution treatment for improving cryogenic temperature toughness of Cr-Ni-Mo-Ti maraging stainless steel
[J]. Heat Treatment of Metals, 2022, 47(1): 44-48.
|
| [12] |
Li Zhu, Zhang Qingyong, Kong Linghua, Lian Guofu, Yang Jinwei.
Characterization of hardness for GCr15 steel based on laser-induced breakdown spectroscopy
[J]. Heat Treatment of Metals, 2022, 47(1): 284-289.
|
| [13] |
Deng Biao, Chen Peng, Wang Guodong.
Effect of tempering temperature on microstructure and properties of secondary hardening martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(9): 65-71.
|
| [14] |
Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong.
Effect of laser shocking on surface integrity of 690 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
|
| [15] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
