| [1] |
Ren Junpeng, Wang Yu, Dong Cuige, Zhao Jun.
Effect of Cu addition on microstructure and properties of SiCp/Al-Si composites
[J]. Heat Treatment of Metals, 2021, 46(8): 36-41.
|
| [2] |
Wang Xin, Pan Xide, Niu Qiang, He Xiangqian.
Microstructure and properties of laser clad Al-Si coating on AZ33M magnesium alloy
[J]. Heat Treatment of Metals, 2021, 46(5): 202-206.
|
| [3] |
Tan Xiao, Hao Yupeng, Yu Xiaodong, Wang Yutian, Tan Chengwen, Hu Jin.
Effect of annealing temperature on recrystallization behaviors of cold-rolled high-purity CVD tungsten
[J]. Heat Treatment of Metals, 2021, 46(3): 33-38.
|
| [4] |
Liu Ran, Gao Yuan, Wu Tao.
Effect of Al/Si ratio on microstructure and wear resistance of Ti-Al-Si coating onTC4 alloy by laser cladding
[J]. Heat Treatment of Metals, 2021, 46(3): 135-139.
|
| [5] |
Liu Dongyang, Yu Xiuyong, Gao Wenli, Lu Zheng, Mao Guoling.
Effect of Sb on eutectic Si and tensile properties of permanent mold cast ZL114A alloy
[J]. Heat Treatment of Metals, 2021, 46(11): 36-41.
|
| [6] |
Wang Junhui, Cui Qingling, Zeng Linlin, Gao Xinyu, Liang Jiawei.
Microstructure evolution of Al-Si coating on hot stamping steel during austenitizing
[J]. Heat Treatment of Metals, 2021, 46(11): 220-225.
|
| [7] |
Chen Zixin, Zhou Houming, Zhu Yuxu, Zhang Zhehao, He Fangjia, Xu Caixing, Liu Gang.
Microstructure and properties of laser clad Ni-Al composite coatings on Cr12MoV steel
[J]. Heat Treatment of Metals, 2021, 46(11): 226-231.
|
| [8] |
Guo Huimin, Li Bo, Zhang Liqun, Tao Jinglei, Huang Wei, Pei Xiuyuan, Xiao Junfeng, Nan Qing.
Effect of real TGO interface topography on interface stress of thermal barrier coatings
[J]. Heat Treatment of Metals, 2021, 46(11): 232-235.
|
| [9] |
Wu Tao, Wu Mengting, Chen Yunxiang, Hua Qianfeng, Shi Shuqin, Li Jiheng, Mao Pengzhan, Chen Xiaoming.
Properties of laser clad AlCoCrFeNiWx high entropy alloy coatings on H13 steel
[J]. Heat Treatment of Metals, 2021, 46(11): 241-244.
|
| [10] |
Zeng Qiang, Wu Ying, Xiao Huijin, Zhu Shaowei.
Effect of heat treatment on microstructure and tensile properties of Inconel 718 alloy prepared by selective laser melting
[J]. Heat Treatment of Metals, 2021, 46(10): 122-126.
|
| [11] |
Zeng Qiang, Wu Ying, Xiao Huijin, Zhu Shaowei.
Hydrogen embrittlement behavior of oilfield-grade Inconel 718 alloy laser welded joint
[J]. Heat Treatment of Metals, 2020, 45(8): 50-55.
|
| [12] |
Tang Peng, Liu Yiyuan, Zhao Yanjun, Hu Zhiliu, Wang Huachun, Peng Linxin, Deng Songyun.
Effect of Si content and heat treatment on microstructure and properties of as-cast Al-Si alloy
[J]. Heat Treatment of Metals, 2020, 45(8): 76-81.
|
| [13] |
Zhao Juan, Cui Xiaoli, Cui Hongwei, Ye Hui.
Effect of homogenization process on microstructure and properties of as-extruded Al-4Si(-0.2Er) alloy
[J]. Heat Treatment of Metals, 2020, 45(8): 131-136.
|
| [14] |
Yin Xin, Yin Dengfeng, Wang Kaixian, Li Jilin, Chi Guoming, Cao Hanquan.
Effect of 0.2%Sn addition on microstructure and mechanical properties of Al-Si-Mg alloy
[J]. Heat Treatment of Metals, 2020, 45(4): 16-21.
|
| [15] |
Gao Shun, Tian Xiaodong, Zhang Mengyao.
Microstructure and properties of B-Al composite coatings on TC4 titanium alloy
[J]. HTM, 2020, 45(3): 11-14.
|
