| [1] |
Li Chao, Wang Teng, Sun Rongqiang, Yang Ping, Zhang Baiyong.
Analysis and improvement of point defects on surface of hot dipaluminum-silicon plated steel sheet
[J]. Heat Treatment of Metals, 2021, 46(3): 213-217.
|
| [2] |
Wang Kaitai, Xu Yunbo, Xu Bing, Gu Xingli, Wang Yuan, Li Jiayu, Ni Shenya, Gong Dianyao.
Novel Q&P process, microstructure and mechanical properties of a 980 MPa grade hot-dip galvanized steel
[J]. Heat Treatment of Metals, 2021, 46(11): 143-146.
|
| [3] |
Chen Kaimin, Wen Chao, Liang Huilei.
Crack analysis of bearing chock and prevention measures
[J]. Heat Treatment of Metals, 2020, 45(4): 221-223.
|
| [4] |
Chen Xiyuan, Guan Wei.
Analysis and countermeasures of common problems on using PAG polymer quenchant
[J]. HTM, 2020, 45(1): 48-52.
|
| [5] |
Luo Xiaoyang,Wang Jin, Zhao Xiaolong, Zhang Liang.
Control of surface oxide defect 440 MPa cold-rolled IF high strength steel strip containing P
[J]. HTM, 2017, 42(4): 195-199.
|
| [6] |
Yang Liqin, Ding Meiliang.
Research on oxidizing?burning?loss?of?heating?furnace and improvement measures
[J]. HTM, 2016, 41(9): 168-170.
|
| [7] |
Li Pingping，Chen Kaimin，Wu Jianhua，Xu Luoping, Liang huilei.
Surface defects analysis of guide roller and counter measures
[J]. HTM, 2016, 41(6): 185-187.
|
| [8] |
Kuang Chunfu, Zheng Zhiwang, Wang Meng.
Effect of soaking temperature on microstructure and properties of 590 MPa hot-dip galvanized dual phase steel
[J]. HTM, 2016, 41(5): 133-136.
|
| [9] |
Zhang Jianqiang1, 2, Chen Changfeng1, Zheng Yanjun1, Li Yan2, Wang Yongwei2, Miao Chengliang2, Huang Xueqi2.
Analysis on surface black spots defects of thick gauge galvanized sheet
[J]. HTM, 2016, 41(4): 205-207.
|
| [10] |
Li Pingping, Chen Kaimin, Wu Jianhua, Xu Luoping, Wang Qun.
Fracture analysis of gear shaft and preventive measures
[J]. HTM, 2016, 41(3): 207-209.
|
| [11] |
Jiang Rusong1, Liao Yonghong2.
Quenching crack analysis and counter measures of 40CrMnMo steel single pump body
[J]. HTM, 2016, 41(12): 187-191.
|
| [12] |
Qiu Yuncheng, Ma Wenzhen.
Analysis on cracks of 27MnCr5 steel input shaft of gear-box upon straightening and countermeasures
[J]. HTM, 2015, 40(3): 195-197.
|
| [13] |
Liu Libin, Jiang Guangrui, Ma Bingzhi, Li Weiran, Liu Huasai, Qi Chunyu.
Dark dot defect on coating surface of continuously annealed hot-dip galvanized steel sheet
[J]. HTM, 2014, 39(9): 137-140.
|
| [14] |
Liu Shunxin, Zhao Zhijian, Hao Ying, Zhao Xinyi, Fu Youchang,Wang Xiuqin.
Forming mechanism and counter measure of pitting on cold rolled continuous annealed strip steel surface
[J]. HTM, 2014, 39(9): 147-150.
|
| [15] |
Wang Changjian.
Cause analysis and counter measure of fracturing pump head crack
[J]. HTM, 2014, 39(9): 151-154.
|
