| [1] |
Sun Guojin, Gao Zhiwen, Cui Xiaoyan, Gao Kekun, Sun Li.
Effect of dual liquid quenching on microstructure and hardness of 9Cr2Mo steel roller
[J]. Heat Treatment of Metals, 2022, 47(3): 88-91.
|
| [2] |
Zhao Yantao, Jiang Zeyi, Zhang Xinru, Wang Dijie.
Temperature uniformity of aluminum plate during double-sided jet heating and roller swing
[J]. Heat Treatment of Metals, 2022, 47(1): 178-184.
|
| [3] |
Hu Wenxiang, Li Jianxin, Shi Zhengliang, Xu Jia, Guan Yunqi, Ding Shaopeng.
Effect of cryogenic treatment on microstructure and wear resistance of alloy cast iron
[J]. Heat Treatment of Metals, 2021, 46(7): 168-172.
|
| [4] |
Yan Chaohui, Wang Youhua, Liu Chengcheng, Wu Shipu.
Influence of transverse flux induction heating excitation parameters on steel strip temperature and heater optimization
[J]. Heat Treatment of Metals, 2021, 46(5): 87-94.
|
| [5] |
Cao Kuo, Feng Yunli, Zhang Xinyue, Li Jie.
Effect of warm rolling temperature on microstructure and properties of medium carbon Cr-Mo steel
[J]. Heat Treatment of Metals, 2020, 45(6): 17-21.
|
| [6] |
Zhao Haiqiang, Chen Hongye.
Formation mechanism and preventive measures of pitting defects on surface of cold rolled continuous annealing strip steel
[J]. Heat Treatment of Metals, 2020, 45(6): 236-238.
|
| [7] |
Zhang Xinyue, Yang Mingwei, Feng Yunli, Cao Kuo, Li Jie.
Effect of annealing time on microstructure and properties of warm rolled 45 steel with pseudoeutectoid type initial microstructure
[J]. Heat Treatment of Metals, 2020, 45(4): 132-136.
|
| [8] |
Cao Yu, Song Xinli, Zhen Aiqin, Chen Rongdong, Jia Juan, Bi Yunjie.
Effect of heat treatment process on microstructure and hardness of high chromium cast iron roller produced by centrifuge casting
[J]. HTM, 2020, 45(2): 108-113.
|
| [9] |
Wang Youhua, Wu Jiancheng, Liu Chengcheng, Chen Long.
Simulation and analysis of eddy current field and temperature field of strips during transverse flux continuous induction heating
[J]. HTM, 2019, 44(1): 229-234.
|
| [10] |
Ji Wenbo, Zhao Hongyang, Hu Xiaodong, Wang Zhenmin, Liu Zijian.
Rapid annealing of warm rolling AZ31 magnesium alloy sheet
[J]. HTM, 2016, 41(9): 94-98.
|
| [11] |
Wang Mingming, Ning Jiangli, Feng Yunli, Zheng Shenbai, Li Jie.
Effect of initial microstructure before rolling on microstructure evolution of bidirectional warm rolled medium carbon steel
[J]. HTM, 2016, 41(7): 12-16.
|
| [12] |
Li Pingping，Chen Kaimin，Wu Jianhua，Xu Luoping, Liang huilei.
Surface defects analysis of guide roller and counter measures
[J]. HTM, 2016, 41(6): 185-187.
|
| [13] |
Guo Wei1,2，Chu Zuoming1，Jin Kang1，Wang Xiaohui1，Chen Dong1，Zhou Yingli1.
Process parameter control?of water quenching and oil cooling for MC3 steel cold work roller
[J]. HTM, 2016, 41(5): 137-141.
|
| [14] |
Wang Yuanwu1,2, Liu Cungen1,2, Wang Xuefeng1,2.
Influence of induction coil parameters on temperature field of steel plate and study of choosing of coil sizes
[J]. HTM, 2016, 41(4): 178-182.
|
| [15] |
Zhang Jingkui, Dong Hua, Zhou Enze.
Optimization of water flow and roller velocity at high-pressure water injection zone of roller-type quenching machine
[J]. HTM, 2016, 41(12): 164-167.
|
