| [1] |
Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting.
Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
|
| [2] |
Chen Liansheng, Zhang Luyou, Tian Yaqiang, Yang Zixuan, Li Hongbin, Pan Hongbo, Wei Yingli.
CCT curves and microstructure and properties of low-carbon high strength marine steel
[J]. Heat Treatment of Metals, 2022, 47(4): 63-68.
|
| [3] |
Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang.
Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
|
| [4] |
Wang Qi, Wu Guangliang.
Effect of tempering temperature on microstructure and properties of 1100 MPa grade high-strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 146-150.
|
| [5] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [6] |
Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo.
Effects of Si content and quenching temperature on microstructure and properties of Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(3): 130-135.
|
| [7] |
Luo Diqiang, Yu Yinhong, Zhang Zhenming, Feng Xiaoming, Liu Min, Lai Chaobin.
Effect of yttrium-based rare earth on inclusions and cryogenic temperature impact property of high strength shipbuilding steel
[J]. Heat Treatment of Metals, 2022, 47(3): 142-146.
|
| [8] |
Ning Jing, Gao Kunyuan, Li Haonan, Wen Shengping, Huang Hui, Wu Xiaolan, Wei Wu, Nie Zuoren.
Effects of composition and cooling rate on solidification structure of Al-xEr alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 151-154.
|
| [9] |
Dai Yongjuan, Wu Xiangxiang, Li Jiakun, Guo Dong, Wang Bo.
Effect of annealing temperature on microstructure and properties of Fe-24.38Mn-0.44C TWIP steel
[J]. Heat Treatment of Metals, 2022, 47(2): 146-152.
|
| [10] |
Liu Yujun, Cheng Xiaonong, Luo Rui, Gao Pei.
Effect of heat treatment process on microstructure and properties of Inconel 617 alloy tube
[J]. Heat Treatment of Metals, 2022, 47(2): 173-177.
|
| [11] |
Li Liangjun, Zhang Jiamin, Chi Hongxiao, Zhou Jian.
Effect of Co microalloying on microstructure and properties of M2 high speed steel
[J]. Heat Treatment of Metals, 2022, 47(1): 73-78.
|
| [12] |
Zhu Henan, Chen Gang, Yang Jiawei, Zhang Zhijian.
Effect of Ti micro-alloying on microstructure and properties of 22MnB5 hot press forming steel
[J]. Heat Treatment of Metals, 2022, 47(1): 125-129.
|
| [13] |
Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren.
Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 130-134.
|
| [14] |
Wang Yinghu, Zheng Huaibei, Bai Qingqing, Song Lingxi, Hu Jin, Huang Bo.
High temperature mechanical properties of Mn18Cr18N high nitrogen austenitic stainless steel
[J]. Heat Treatment of Metals, 2022, 47(1): 172-177.
|
| [15] |
Qiao Jian, Liu Zheng, Gao Huiming, Yang Li.
Effect of aging time on microstructure and shear properties of Cu/In-Sn-2.5Ag/Cu solder joint
[J]. Heat Treatment of Metals, 2021, 46(9): 104-107.
|
