| [1] |
Chen Zhijie, Cui Tong.
Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 213-218.
|
| [2] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [3] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [4] |
Lin Hongchun, Ma Dandan, Yu Shengwang, Ma Yong, Zhou Bing, Gao Jie, Hei Hongjun, Xue Yanpeng.
Preparation and corrosion resistance of highly adhesive superhydrophobic surface
[J]. Heat Treatment of Metals, 2022, 47(2): 193-199.
|
| [5] |
Chen Mingxuan, Ma Qiang, Meng Junsheng, Li Chengshuo, Shi Xiaoping.
Research progress of high-entropy alloy coating
[J]. Heat Treatment of Metals, 2021, 46(9): 7-14.
|
| [6] |
Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong.
Effect of laser shocking on surface integrity of 690 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
|
| [7] |
Yang Wenhao, Bao Mingdong, Tang Bin, Wang Yupeng, Zhao Guohua, Wang Shuaikang, Wang Duo.
Influence of surface roughness on surface morphology and sputtering performance of magnetron sputtering etched area of pure Cu target
[J]. Heat Treatment of Metals, 2021, 46(8): 230-235.
|
| [8] |
Tong Jianbo, Li Xuefei, Huang Lijun, Zhang Wenqiang.
Surface oxygen diffusion strengthening of near β titanium alloy by pre-coating
[J]. Heat Treatment of Metals, 2021, 46(6): 74-78.
|
| [9] |
Tan Xiaomeng, Tian Feng, Qiao Xin, Guo Xin'ai.
Cracking failure analysis on a high speed shaft of belt conveyor reducer
[J]. Heat Treatment of Metals, 2021, 46(6): 253-255.
|
| [10] |
Xiong Ziliu, Qi Jianjun, Sun Li, Dong Yikang, Zhao Yizhe, Yang Ting, Xing Chengliang.
Formability of high strength dual phase steels
[J]. Heat Treatment of Metals, 2021, 46(5): 66-70.
|
| [11] |
Ma Xiaofeng, Ma Ning.
Effect of vacuum pressure on ion nitriding properties of small modulus spline
[J]. Heat Treatment of Metals, 2021, 46(5): 190-192.
|
| [12] |
Shang Peng, Li Jingman, Zhang Yihai, Zhang Jie, Xia Lei, Zhang Dawei.
Path selection and quality analysis of laser clad CoCrMo strengthened coating on titanium alloy surface
[J]. Heat Treatment of Metals, 2021, 46(5): 207-212.
|
| [13] |
Ma Heng, Huo Xiaoxin, Wu Hongyan, Gao Xiuhua, Du Linxiu.
Microstructure, properties and surface quality of Q550D V-N-microalloyed steel extra heavy plate
[J]. Heat Treatment of Metals, 2021, 46(4): 65-69.
|
| [14] |
Pan Hongji, Luo Defu, Chen Shengyi.
Effect of nitride carbonize and oxidize multi-treatment (QPQ) on microstructure and properties of MPS700A steel
[J]. Heat Treatment of Metals, 2021, 46(4): 83-87.
|
| [15] |
Yue Jiahong, Meng Xuan, Yao Xiaowei, Kong Lingfei, Yang Yang, Qin Guofang.
Corrosion resistance of 40Cr steel after nitriding and oxidation treatment
[J]. Heat Treatment of Metals, 2021, 46(4): 217-219.
|
