[1] |
Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng.
Effect of magnetic field pre-annealing on microstructure and texture of CGO steel
[J]. Heat Treatment of Metals, 2022, 47(4): 128-132.
|
[2] |
Dong Lili, Ma Yonglin, Su Pengji, Yang Xuefeng.
Effect of pulsed magnetic field heat treatment on microstructure and texture of CGO oriented silicon steel during decarburization annealing
[J]. Heat Treatment of Metals, 2022, 47(2): 31-34.
|
[3] |
Zou Ying, Liu Huasai, Han Yun, Wang Chaobin, Wang Haiquan.
Development of 800 MPa grade hot-rolled galvanized complex phase steel
[J]. Heat Treatment of Metals, 2022, 47(2): 65-69.
|
[4] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Finite element analysis of novel martensitic heat-resistant steel G115 heavy castings
[J]. Heat Treatment of Metals, 2022, 47(2): 229-235.
|
[5] |
Fan Hehe, Jin Zili, Ren Huiping, You Xinghua.
Recrystallization behavior during hot rolling of high Nb-Ti non-oriented silicon steel for new energy vehicle
[J]. Heat Treatment of Metals, 2022, 47(1): 88-93.
|
[6] |
Pan Zhongde, Zhang Pengcheng, Wu Huibin, Hu Qilong.
Effect of normalizing rolling and subsequent normalizing process on microstructure and properties of S460NL high-strength low-temperature structural steel
[J]. Heat Treatment of Metals, 2021, 46(9): 142-145.
|
[7] |
Zhao Peilin, Liu Chao, Wu Huiliang, Zheng Li.
Effect of normalizing temperature on microstructure and low temperature toughness of 355 MPa heavy section steel for marine engineering
[J]. Heat Treatment of Metals, 2021, 46(6): 102-106.
|
[8] |
Li Zhaoguo, Wang Ke, Ji Xianbin, Xu Bin, Wei Haixia.
Effect of tempering temperature on microstructure and properties of 00Cr13Ni5Mo super martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(5): 95-98.
|
[9] |
Wang Haibin, Jia Jianping, Zhang Chaolei, Lu Weiyong, Wang Jianzhong, Li Na.
Aging behavior of largegauge 82B steel hot-rolled wire in winter
[J]. Heat Treatment of Metals, 2021, 46(4): 95-99.
|
[10] |
Luo Ping, Li Xianjun, Zhang Wenliang, Wang Jin, Wu Xiaolin, Shang Yong, Shi Yuezhang.
Development of walking beam production line for isothermal normalizing of gear shaft blanks
[J]. Heat Treatment of Metals, 2021, 46(4): 243-246.
|
[11] |
Lu Jiadong, Wu Shengjie, Yue Chongxiang, Li Hualong.
Effect of secondary annealing temperature on microstructure and magnetic properties of non-oriented silicon steel
[J]. Heat Treatment of Metals, 2021, 46(3): 67-70.
|
[12] |
Yin Heping, Yin Minjie.
Optimization of heat treatment process of SCM420 steel planetary gear for industrial robot
[J]. Heat Treatment of Metals, 2021, 46(3): 104-108.
|
[13] |
Yu Chunming, Zhang Jiming, Dang Bo, Zhang Yi.
Grain boundary and texture evolution of a high magnetic grain-oriented silicon steel during rolling and heat treatment
[J]. Heat Treatment of Metals, 2021, 46(12): 204-208.
|
[14] |
Li Li, Jia Zhiwei, Zhang Yifan, Luo Li, Jiang Qiwu.
Ductile-brittle transition temperature of a grain-oriented silicon steel and its influencing factors
[J]. Heat Treatment of Metals, 2021, 46(12): 214-217.
|
[15] |
Wang Zhilei, Che Shangfeng, Hou Diwen, Fang Feng, Zhang Yuanxiang, Wang Yang, Zhang Xiaoming.
Microstructure and texture evolution, properties of 3.4%Si non-oriented silicon steel strip produced by twin-roll strip casting
[J]. Heat Treatment of Metals, 2021, 46(10): 18-25.
|