| [1] |
Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu.
Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel
[J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
|
| [2] |
Wang Yinghu, Zheng Huaibei, Liu Tingyao, Song Lingxi, Bai Qingqing.
Effect of solid solution treatment on microstructure and carbides of 53Cr21Mn9Ni4N heat-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 39-45.
|
| [3] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [4] |
Wang Qi, Wu Guangliang.
Effect of tempering temperature on microstructure and properties of 1100 MPa grade high-strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 146-150.
|
| [5] |
Huo Jinyuan, Chen Guojun, Zheng Dexin.
Induction hardening process of internal spline in tulip of constant speed drive shaft
[J]. Heat Treatment of Metals, 2022, 47(4): 178-181.
|
| [6] |
Liu Wenbin, Qiao Longyang, Pan Xinyu, Cheng Ge, Li Aina, Pei Xinjun.
Effect of quenching temperature on microstructure and properties of M390 powder metallurgical stainless steel for chopping knives and scissors
[J]. Heat Treatment of Metals, 2022, 47(4): 189-195.
|
| [7] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [8] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
| [9] |
Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun.
Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings
[J]. Heat Treatment of Metals, 2022, 47(4): 263-267.
|
| [10] |
Huang Long, Deng Xiangtao, Wang Zhaodong.
Effect of tempering temperature on microstructure and properties of particle reinforced low-alloyed wear resistant steel
[J]. Heat Treatment of Metals, 2022, 47(3): 1-6.
|
| [11] |
Sun Guojin, Gao Zhiwen, Cui Xiaoyan, Gao Kekun, Sun Li.
Effect of dual liquid quenching on microstructure and hardness of 9Cr2Mo steel roller
[J]. Heat Treatment of Metals, 2022, 47(3): 88-91.
|
| [12] |
Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei.
Effect of quenching temperature on microstructure and properties of a low cobalt secondary hardening steel
[J]. Heat Treatment of Metals, 2022, 47(3): 92-96.
|
| [13] |
Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo.
Effects of Si content and quenching temperature on microstructure and properties of Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(3): 130-135.
|
| [14] |
Wu Fangjun, Deng Xiaoyun, Jie Xiaohua, Zheng Kaihong, Luo Zhichao.
Thermal fatigue properties of H13 and Dievar steels for hot-work die
[J]. Heat Treatment of Metals, 2022, 47(3): 165-172.
|
| [15] |
Li Kuo, Sun Mingyue, Xu Bin, Li Dianzhong.
Analysis of influencing factors on transverse impact properties of rare earth H13 die steel
[J]. Heat Treatment of Metals, 2022, 47(3): 181-185.
|
