| [1] |
Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin.
Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 10-16.
|
| [2] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [3] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [4] |
Chen Zhijie, Cui Tong.
Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 213-218.
|
| [5] |
Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng.
Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing
[J]. Heat Treatment of Metals, 2022, 47(4): 245-250.
|
| [6] |
Zhao Zishuo, Wu Meiping, Miao Xiaojin, Cui Chen, Gong Yuling.
Effect of laser power on microstructure and corrosion resistance of FeCoNiCrMo high-entropy alloy/graphene oxide composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 251-257.
|
| [7] |
Luo Jiandong, Hu Yanhong, Lin Yuzhou.
Application of low temperature nitriding process with double power supplies on 316 stainless steel
[J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
|
| [8] |
Shi Haifang, Li Qiang.
Effect of carbon content on microstructure and properties of Al0.5Co0.5NiCrFe high-entropy alloy coating
[J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
|
| [9] |
Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang.
Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel
[J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
|
| [10] |
Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin.
Research progress of laser modification technology for titanium alloy surface
[J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
|
| [11] |
Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li.
Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel
[J]. Heat Treatment of Metals, 2022, 47(2): 178-182.
|
| [12] |
Lin Hongchun, Ma Dandan, Yu Shengwang, Ma Yong, Zhou Bing, Gao Jie, Hei Hongjun, Xue Yanpeng.
Preparation and corrosion resistance of highly adhesive superhydrophobic surface
[J]. Heat Treatment of Metals, 2022, 47(2): 193-199.
|
| [13] |
Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei.
Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding
[J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
|
| [14] |
Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia.
Failure analysis of 20 steel equal-diameter tee
[J]. Heat Treatment of Metals, 2022, 47(2): 262-266.
|
| [15] |
Wang Xin, Liang Xiaokai, Sun Xinjun.
Corrosive wear resistance of low alloy martensitic steel containing antimony
[J]. Heat Treatment of Metals, 2022, 47(1): 38-43.
|
