Loading...
Home
About Journal
Editorial Board
Call Paperse
Subscribe
Advertising Services
Contact Us
Corporate
中文
Online
Online Journals
Forthcoming Article
Current Issue
Archive
Advanced Search
Volumn Content
Browse by section
Read Articles
Download Articles
E-mail Alert
RSS
Downloads
Copyright Transfer Agreement
Submission Template
Recommended Paper
More...
Current Issue
High temperature oxidation property of aluminum-containing austenitic heat-resisting steel
Wu Xiaodong, Wu Gang, Zhu Jingjing, Li Dongsheng, Cheng Xiaonong
2016, 41(8): 1-5. doi:
10.13251/j.issn.0254-6051.2016.08.001
Abstract
(
286
)
PDF
(680KB) (
198
)
High-temperature oxidation behavior of Fe-Ni alloy at 600 ℃ in air
Wang Zhiwu, Liu Qianqian, Gong Xueting
2016, 41(8): 6-10. doi:
10.13251/j.issn.0254-6051.2016.08.002
Abstract
(
93
)
PDF
(607KB) (
141
)
Preparation and tensile property of bimodal nanocrystalline Cu-Ag alloy
Liu Yingguang，Ju Rongyuan，Li Huijun
2016, 41(8): 11-14. doi:
10.13251/j.issn.0254-6051.2016.08.003
Abstract
(
88
)
PDF
(602KB) (
107
)
Hot plasticity of 690 MPa grade steel for marine engineering
Zhou Yanfeng1，Yan Ling2，Li Shengli1，Zhou Cheng2，Zhang Peng2，Han Peng1
2016, 41(8): 14-17. doi:
10.13251/j.issn.0254-6051.2016.08.004
Abstract
(
109
)
PDF
(606KB) (
123
)
Effect of hardness on thermal fatigue of H13 hot work die steel
Xu Shuyang, Zuo Pengpeng, Wu Xiaochun
2016, 41(8): 18-23. doi:
10.13251/j.issn.0254-6051.2016.08.005
Abstract
(
146
)
PDF
(600KB) (
420
)
Aging sensitivity of high hardness tin-plate
Wu Shengjie1, Liu Xinyuan1, Li Hualong1, Chen Gang2
2016, 41(8): 24-28. doi:
10.13251/j.issn.0254-6051.2016.08.006
Abstract
(
83
)
PDF
(603KB) (
119
)
Effect of heat treatment on microstructure and hardness of CoCrFeNiMo high entropy alloy
Liu Liang, Zhang Yue, Zhao Zuofu, Shang Jian
2016, 41(8): 29-32. doi:
10.13251/j.issn.0254-6051.2016.08.007
Abstract
(
179
)
PDF
(604KB) (
398
)
Effect of quenching temperature on ferrite content of 1Cr13 martensitic stainless steel
Liu Hailong, Dang Shue，Liu Jiansheng
2016, 41(8): 33-36. doi:
10.13251/j.issn.0254-6051.2016.08.008
Abstract
(
102
)
PDF
(639KB) (
358
)
Measurement and analysis of CCT curves of ship plate steel
Li Xiaolin 1, Li Hongbin2, Lin Zhe 1, Li Shuo1, Xu Shucheng1
2016, 41(8): 37-41. doi:
10.13251/j.issn.0254-6051.2016.08.009
Abstract
(
80
)
PDF
(600KB) (
159
)
Continuous cooling transformation behavior of undercooled austenite of 30CrMnTi steel
Wang Lijun, Li Baoxiu, Chen Jilin, Zhai Jinpo, Feng Zhongxian, Wang Ningtao
2016, 41(8): 41-44. doi:
10.13251/j.issn.0254-6051.2016.08.010
Abstract
(
329
)
PDF
(602KB) (
58
)
Aging law of T23 steel final superheater tube serviced for different time
Xu Kai1, He Cheng2, Li Wensheng2, Zhao Jianping2, Ai Hong2, Zhang Siwen2, Shi Baoliang3, Ren Ai3
2016, 41(8): 45-51. doi:
10.13251/j.issn.0254-6051.2016.08.011
Abstract
(
85
)
PDF
(599KB) (
93
)
Aged microstructure and hardness of rare earth microalloyed 700 MPa grade high strength steel during coiling
Wang Shuo1, Jin Zili1, Ren Huiping1,2, Zhang Lingyu1, Li Binglei1, Kang Xueliang1
2016, 41(8): 52-56. doi:
10.13251/j.issn.0254-6051.2016.08.012
Abstract
(
68
)
PDF
(599KB) (
165
)
Effect on solution holding time on microstructure and mechanical properties of GH4698 superalloy
Zhao Yihan, Peng Jianqiang, Zhang Xiaowu, Xing Yurong, Wang Meiying，Liu Xinxin
2016, 41(8): 56-59. doi:
10.13251/j.issn.0254-6051.2016.08.013
Abstract
(
92
)
PDF
(606KB) (
123
)
Microstructure and composition analysis of CVT metal belt
Liu Jingang1,Ge Zhenbin 1, Xiao Lianghong1，Li Quan2
2016, 41(8): 60-66. doi:
10.13251/j.issn.0254-6051.2016.08.014
Abstract
(
81
)
PDF
(602KB) (
111
)
Effect of quenching process on microstructure and mechanical properties of ultra-high strength heavy plate
Yang Han, Qu Jinbo, Lu Chunjie
2016, 41(8): 67-72. doi:
10.13251/j.issn.0254-6051.2016.08.015
Abstract
(
75
)
PDF
(603KB) (
105
)
Effect of annealing on microstructure and properties of Zr-4 alloy composite plate
Yang Pan, Liu Yunming, Jiang Qiang, Yao Lifu, Zhang Yiyong
2016, 41(8): 72-75. doi:
10.13251/j.issn.0254-6051.2016.08.016
Abstract
(
99
)
PDF
(602KB) (
119
)
Effect of Cu partitioning on microstructure and mechanical properties of low-carbon steel by I&Q&P process
Chen Liansheng, Xu Jinghui, Tian Yaqiang, Zheng Xiaoping, Song Jinying, Mi Zhenpeng
2016, 41(8): 76-80. doi:
10.13251/j.issn.0254-6051.2016.08.017
Abstract
(
87
)
PDF
(600KB) (
110
)
Effects of solution temperature on corrosion resistance of 2101 saving nickel duplex stainless steel
Liu Weixia1, 2, He Yan1, Han Peide1
2016, 41(8): 80-84. doi:
10.13251/j.issn.0254-6051.2016.08.018
Abstract
(
80
)
PDF
(605KB) (
100
)
Effects of heat treatment on microstructure and mechanical properties of welded joint of Ti-22Al-25Nb/Ti60 dual alloys
Guo Fan1, Guo Hongzhen2, Wang Guoqing3, Ye Mao1, Meng Lingbo1, Jiang Feng1, Liu Yun1
2016, 41(8): 85-88. doi:
10.13251/j.issn.0254-6051.2016.08.019
Abstract
(
132
)
PDF
(602KB) (
87
)
Effect of coating speed and annealing on properties of direct Pd-coated copper bonding wire
Fan Junling1, Cao Jun2, Gao Wenbin2, Liu Zhiqiang2
2016, 41(8): 89-93. doi:
10.13251/j.issn.0254-6051.2016.08.020
Abstract
(
136
)
PDF
(602KB) (
128
)
Effect of enamel firing process on microstructure and properties of 210 MPa grade enamel steel
Zhang Yi1, Wu Hongyan2, Wu Tong2, Zhang Qi2, Du Yu2, Du Linxiu2
2016, 41(8): 94-98. doi:
10.13251/j.issn.0254-6051.2016.08.021
Abstract
(
107
)
PDF
(600KB) (
108
)
Plasma cladding surface modified layer and its properties on AZ91 alloy for automobile engine
Tan Xiaofeng1, Shi Boqiang2, Guo Pengyan3
2016, 41(8): 99-103. doi:
10.13251/j.issn.0254-6051.2016.08.022
Abstract
(
95
)
PDF
(603KB) (
68
)
Effects of vacuum HPDC on eutectic Si of Al-Si-Cu alloys during solution treatment
Cao Hanxue1,2, Jia Congbo1, Tang Haoxing1, Jiang Hao1
2016, 41(8): 104-107. doi:
10.13251/j.issn.0254-6051.2016.08.023
Abstract
(
67
)
PDF
(733KB) (
111
)
Annealing process of SAl 4047 Al-Si alloy solder?wire during drawing
Zhu Yanli1, Xu Xiaolong2, Hu Xuefeng2, Ming Tingze2, Hu Guangzhong1, Li Chunlin1
2016, 41(8): 108-111. doi:
10.13251/j.issn.0254-6051.2016.08.024
Abstract
(
83
)
PDF
(736KB) (
123
)
Vacuum heat treatment of W6Mo5Cr4V2 cast steel valve seat
Wang Hongwei, Gu Min, Zhao Shaofu，Cao Zhiwen，Xu Kunming
2016, 41(8): 111-113. doi:
10.13251/j.issn.0254-6051.2016.08.025
Abstract
(
96
)
PDF
(737KB) (
73
)
Vacuum die casting and heat treatment of Al-Cu alloy
Yang Chengzhi1, Long Siyuan1,2, Wang Peng1, Zhu Shuqing1, Huang Yanyan1
2016, 41(8): 114-118. doi:
10.13251/j.issn.0254-6051.2016.08.026
Abstract
(
88
)
PDF
(730KB) (
128
)
Effect of austempering process on microstructure and mechanical properties of ductile iron containing Cr
Xing Xiangdong1, Xu Chenyang1, Liu Yiran2
2016, 41(8): 119-122. doi:
10.13251/j.issn.0254-6051.2016.08.027
Abstract
(
98
)
PDF
(733KB) (
122
)
Influence of scanning velocity on microstructure and properties of Co-based alloy coatings by diode laser cladding
Guo Shirui1, Yi Yunjie2, Yao Jianhua3，4
2016, 41(8): 123-127. doi:
10.13251/j.issn.0254-6051.2016.08.028
Abstract
(
108
)
PDF
(730KB) (
77
)
HVOF sprayed coating on surface of main shaft for CNC machine tools and its wear resistance
Shu Yufeng 1, Zhang Haiying2
2016, 41(8): 128-133. doi:
10.13251/j.issn.0254-6051.2016.08.029
Abstract
(
90
)
PDF
(731KB) (
59
)
Comparison of property improvement of U71Mn, U75V and U78CrV rail steels by online heat treatment
Dong Huali
2016, 41(8): 133-137. doi:
10.13251/j.issn.0254-6051.2016.08.030
Abstract
(
143
)
PDF
(734KB) (
140
)
Application of plasma electrolytic oxidation in vacuum potato seed meter
Li Zihui1, Yang Miaoyuan2, Lv Jingqing1,3, Li Guang2, Xia Yuan2, Liu Zhongyuan1, Li Jicheng1, Yang Ying1
2016, 41(8): 138-142. doi:
10.13251/j.issn.0254-6051.2016.08.031
Abstract
(
77
)
PDF
(735KB) (
88
)
Surface boronizing process of roof support cylinder piston rod
Fang Min
2016, 41(8): 143-147. doi:
10.13251/j.issn.0254-6051.2016.08.032
Abstract
(
94
)
PDF
(736KB) (
94
)
Effect of heat treatment on corrosion behavior of X80 steel in Yingtan soil simulated solution
Wang Xia1，Guo Chenhui1，Chen Yuxiang 2，Sun Yuwei3，Li Houguo1，Shi Shengchuang1
2016, 41(8): 148-153. doi:
10.13251/j.issn.0254-6051.2016.08.033
Abstract
(
111
)
PDF
(730KB) (
115
)
Carburizing and quenching optimization and distortion control of18NiCrMo5 steel internal gearring
Li Rong, Liang Tairong, Chen Xiaojun
2016, 41(8): 154-156. doi:
10.13251/j.issn.0254-6051.2016.08.03
Abstract
(
107
)
PDF
(735KB) (
140
)
Material selection and heat treatment of whole bridge plug slip
Xue Zhanfeng1, Yuan Dayong2, Wu Jinxia1, Ma Lanrong1
2016, 41(8): 157-160. doi:
10.13251/j.issn.0254-6051.2016.08.035
Abstract
(
72
)
PDF
(728KB) (
58
)
Effect of heat treatment on service life of H13 steel bar extruding die
Dan Jiapeng1, 2, Yao Zekun1, 2, Hu Jiyun3, Guo Hongzhen1, 2
2016, 41(8): 161-164. doi:
10.13251/j.issn.0254-6051.2016.08.036
Abstract
(
81
)
PDF
(733KB) (
92
)
Simulation of induction heating and temperature distribution on roller surface during warm rolling
Li Tingting1, Zhou Yueming2, Shu Da1
2016, 41(8): 165-169. doi:
10.13251/j.issn.0254-6051.2016.08.037
Abstract
(
88
)
PDF
(742KB) (
142
)
Numerical simulation of temperature and stress fields for main pipeline of AP1000 nuclear power during quenching process
Li Chao, Zhou Xianliang, Hua Xiaozhen, Peng Xinyuan, Tang Longshu, Lu Wenjie
2016, 41(8): 170-174. doi:
10.13251/j.issn.0254-6051.2016.08.038
Abstract
(
72
)
PDF
(742KB) (
280
)
Effect of creep cavity size on stress field of nickel-based alloy
Ye Haoyu1, Zhou Yu2, Rao Sixian1
2016, 41(8): 175-178. doi:
10.13251/j.issn.0254-6051.2016.08.039
Abstract
(
111
)
PDF
(745KB) (
68
)
Modified Johnson-Cook constitutive equation of Ti-6Al-4V alloy considering high temperature recrystallization
Wang Qi, Zheng Bailin, Zhang Kai, Li Yong
2016, 41(8): 179-183. doi:
10.13251/j.issn.0254-6051.2016.08.040
Abstract
(
80
)
PDF
(736KB) (
130
)
Hot deformation behavior and strain compensation constitutive model of high strength and high toughness Ti6246 alloy
Zhu Hongjun
2016, 41(8): 184-188. doi:
10.13251/j.issn.0254-6051.2016.08.041
Abstract
(
106
)
PDF
(741KB) (
113
)
Failure analysis of HXD3B primary spring used in locomotive
Du Peixuan1,2, Liang Yilong1,2, Lei Lei1,2, Jiang Yun1,2,Yang Ming1,2
2016, 41(8): 189-192. doi:
10.13251/j.issn.0254-6051.2016.08.042
Abstract
(
99
)
PDF
(739KB) (
93
)
Fracture reason analysis of well-logging stainless steel wire in a western oilfield
Long Yan, Kuang Xianren, Liu Wenhong, Ding Han, Lin Kai
2016, 41(8): 192-196. doi:
10.13251/j.issn.0254-6051.2016.08.043
Abstract
(
109
)
PDF
(737KB) (
328
)
Cause analysis of “white circle” phenomenon of GH536 alloy pipe
Wang Xiaoqing, Zhang Yindong, Liu Juanjuan
2016, 41(8): 197-198. doi:
10.13251/j.issn.0254-6051.2016.08.044
Abstract
(
89
)
PDF
(735KB) (
105
)
Microstructure identification for steels
Liu Zongchang, Li Yiming
2016, 41(8): 199-204. doi:
10.13251/j.issn.0254-6051.2016.08.045
Abstract
(
127
)
PDF
(735KB) (
151
)
